Beijing Silk Road Enterprise Management Services Co.,LTD
Focus On Quality, Casting Success.
Add to Cart
Weaving Type in Spool Diameter 1.42mm Stainless Steel Cold Cable
Product Information
Stainless Steel Cold Cable is made of stainless steel as raw material for various kinds of silk products of different specifications and models. The cross section is generally round or flat. The common stainless steel wires with good corrosion resistance and high cost performance are 201, 304 and 316 stainless steel wires.
Specifications
| Name | Code |
Characteristics
| Specification | Material |
| Stainless steel soft wire / Hydrogen wire | S, soft | Bright surface, soft, no magnetism, fatigue resistance, large extension force and other characteristics
| 0.09 — 0.45mm | 201, 304, 304L, 316, 316L, 310, 310S, 321, etc.
|
| Stainless steel light cable
| LD, lightly drawn | After heat treatment, the steel wire shall be pulled with small reduction surface. The surface is bright, soft, fatigue resistant, and has certain elongation.
| 0.5 — 1.5mm | 201, 304, 304L, 316, 316L, etc.
|
| Stainless steel cold cable
| WCD, cold drawn | The surface is smooth, toughness is good and wear resistant
| 0.03 — 6.0mm | 201, 304, 304L, 316, 316L, etc.
|
| Stainless steel spring wire
| - | High hardness, strong elasticity, good wear resistance and compression resistance
| 0.15 — 5.0mm | 302, 304H, 304L, 316, 316L, 310, 310S, 321, etc.
|
Material composition table
| AISI Material | Chemical composition (%) | |||||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Ti | |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.06 | ≤0.03 | 3.5~5.5 | 16~18 | - | - | - |
| 304 | <0.08 | <1.0 | <2.0 | <0.035 | <0.03 | 8~10 | 17~19 | - | - | - |
| 304L | <0.03 | <1.0 | <2.0 | <0.04 | <0.03 | 9~13 | 18~20 | - | - | - |
| 304HC | <0.06 | <1.0 | 1.2-1.8 | <0.035 | <0.03 | 8~11 | 17~19 | - | 2.0-3.0 | - |
| 316 | <0.08 | <1.0 | <2.0 | <0.04 | <0.03 | 10~14 | 16~18 | 2.0~3.0 | - | - |
| 316L | <0.03 | <1.0 | <2.0 | <0.04 | <0.03 | 12~15 | 16~18 | 2.0~3.0 | - | - |
| 310S | <0.08 | <1.5 | <2.0 | <0.04 | <0.03 | 19~22 | 24~26 | - | - | - |
| 321 | <0.08 | <1.0 | <2.0 | <0.045 | <0.03 | 9~13 | 17~19 | - | - | >0.035 |
| 301 | <0.15 | <1.0 | <2.0 | <0.04 | <0.03 | >7 | 16~18 | - | - | - |
| 302 | <0.15 | <1.0 | <2.0 | <0.04 | <0.03 | >8 | 17~19 | - | - | - |
Product specification parameter table
| Wire diameter(mm) | Tolerance(mm) | Maximum diameter deviation(mm) |
| 0.020-0.049 | +0.002 -0.001 | 0.001 |
| 0.050-0.074 | ±0.002 | 0.002 |
| 0.075-0.089 | ±0.002 | 0.002 |
| 0.090-0.109 | +0.003 -0.002 | 0.002 |
| 0.110-0.169 | ±0.003 | 0.003 |
| 0.170-0.184 | ±0.004 | 0.004 |
| 0.185-0.199 | ±0.004 | 0.004 |
| 0.-0.299 | ±0.005 | 0.005 |
| 0.300-0.310 | ±0.006 | 0.006 |
| 0.320-0.499 | ±0.006 | 0.006 |
| 0.500-0.599 | ±0.006 | 0.006 |
| 0.600-0.799 | ±0.008 | 0.008 |
| 0.800-0.999 | ±0.008 | 0.008 |
| 1.00-1.20 | ±0.009 | 0.009 |
| 1.20-1.40 | ±0.009 | 0.009 |
| 1.40-1.60 | ±0.010 | 0.010 |
| 1.60-1.80 | ±0.010 | 0.010 |
| 1.80-2.00 | ±0.010 | 0.010 |
| 2.00-2.50 | ±0.012 | 0.012 |
| 2.50-3.00 | ±0.015 | 0.015 |
| 3.00-4.00 | ±0.020 | 0.020 |
| 4.00-5.00 | ±0.020 | 0.020 |
